- Details
- Features
- Tech Specs
- Reviews
Why you need the Warm Audio WA412 4 Channel Mic Pre:
Each channel utilizes a fully discrete socketed opamp that can be swapped with other opamps. Discrete opamp circuitry is known for its high headroom and low distortion characteristics and has much to do with the coveted sound of these classic console preamps.
Carefully choosing the WA-412 components has resulted in an amazing four channel ‘workhorse’ preamp/DI that performs at the highest levels, while still adding a touch of vintage console magic to your signal.
Product Name | Warm Audio WA412 4-Channel Mic Pre |
---|---|
Brand | Warm Audio |
Condition | New |
MPN | WA412 |
UPC | 638142859295 |
Shipping Option | Free Shipping to the Continental U.S. |
- Mic & Instrument Inputs
- Up to 65 dB of Gain
- Output Gain Attenuator
- Transformer Balanced XLR & TRS Outputs
- X520 Discrete Op-Amp in Every Channel
- Switchable Input Impedance on Mic & Hi-Z
- LED Metering
- 48V Phantom Power, Polarity & 20 dB Pad
-
4 Channel Microphone Preamplifier + Instrument DI
-
Fully discrete, transformer coupled, through-hole component topology
-
Altran USA custom wound, premium input and output transformers
-
X520 discrete op-amp in every channel, socketed for convenience. Can be user-replaced with most 6 pin, discrete op-amps for varying flavor & tone
-
65db of gain
-
Inputs - Microphone XLR & Active Instrument 2Meg ohm HI-Z
-
Outputs - Transformer balanced XLR & TRS
-
TONE button input impedance - Switches from 600 ohms to 150 ohms (affects the tone of both the mic and HI-Z inputs)
-
-20db pad - pads both mic and instrument DI inputs
-
Self noise: <-90dB (nominal)
-
Frequency response: 20hz to 20khz <+/-0.25dB (TONE button out), 20hz to 20khz +/-2dB (TONE button in)
-
+48 volt phantom power
-
LED metering
-
Output trim knob for precise level control and tone sculpting
-
Internal power supply (grounded, 3 pin IEC cord)
Warm Audio WA412 4-Channel Mic Pre
Why you need the Warm Audio WA412 4 Channel Mic Pre:
Each channel utilizes a fully discrete socketed opamp that can be swapped with other opamps. Discrete opamp circuitry is known for its high headroom and low distortion characteristics and has much to do with the coveted sound of these classic console preamps.
Carefully choosing the WA-412 components has resulted in an amazing four channel ‘workhorse’ preamp/DI that performs at the highest levels, while still adding a touch of vintage console magic to your signal.
Product Name | Warm Audio WA412 4-Channel Mic Pre |
---|---|
Brand | Warm Audio |
Condition | New |
MPN | WA412 |
UPC | 638142859295 |
Shipping Option | Free Shipping to the Continental U.S. |
- Mic & Instrument Inputs
- Up to 65 dB of Gain
- Output Gain Attenuator
- Transformer Balanced XLR & TRS Outputs
- X520 Discrete Op-Amp in Every Channel
- Switchable Input Impedance on Mic & Hi-Z
- LED Metering
- 48V Phantom Power, Polarity & 20 dB Pad
-
4 Channel Microphone Preamplifier + Instrument DI
-
Fully discrete, transformer coupled, through-hole component topology
-
Altran USA custom wound, premium input and output transformers
-
X520 discrete op-amp in every channel, socketed for convenience. Can be user-replaced with most 6 pin, discrete op-amps for varying flavor & tone
-
65db of gain
-
Inputs - Microphone XLR & Active Instrument 2Meg ohm HI-Z
-
Outputs - Transformer balanced XLR & TRS
-
TONE button input impedance - Switches from 600 ohms to 150 ohms (affects the tone of both the mic and HI-Z inputs)
-
-20db pad - pads both mic and instrument DI inputs
-
Self noise: <-90dB (nominal)
-
Frequency response: 20hz to 20khz <+/-0.25dB (TONE button out), 20hz to 20khz +/-2dB (TONE button in)
-
+48 volt phantom power
-
LED metering
-
Output trim knob for precise level control and tone sculpting
-
Internal power supply (grounded, 3 pin IEC cord)
- Choosing a selection results in a full page refresh.
- Opens in a new window.