Features

• PC: 32 & 64 bits VST and RTAS for Windows XP / Vista / Windows 7 / Windows 8
• Mac: 32 & 64 bits AU and VST and 32 bit RTAS for OSX 10.5 or higher
• Mac: 32 bit AU, VST & RTAS for OSX 10.4 (Tiger)
• Serial/license system, 2nd serial for 2nd computer/laptop are available after you have registering the product's original serial/license.

• Uses sound banks composed of 128 presets.
• Preset handling with copy, paste, clear and compare function.'Quick Browser', 'Recently Browsed' and 'Favorite' functions.All settings are stored inside each preset.
• Presets are stored in clear categories banks.

• External controller hardware (fader-box) settings can be saved and restored.

• On/Off function.
• Amp Simulator
  • Amplifier simulation effect. Several types of amp types are simulated. Great for creating edgy sounds.Type of amp simulation. Settings are:- None, 4x10" guitar speakers, 4x12" guitar speakers, Bass speaker, Combo speaker and Radio speaker.Distort Amount of distortion added to the sound.
• Cabinet Simulator
  • Several types of cabinet types are simulated. Great for creating edgy sounds.Type of cabinet simulation. Settings are:- None,Fender,Marshall & Off Axis.Distort Amount of distortion added to the sound.
• Clipper
  • Hard clipper, this limits output which is to above or below the set clipping levelNegative The clipping level for the negative signal. From 0% (no clipping) to 100% (maximum clipping).Positive The clipping level for positive signal. From 0% (no clipping) to 100% (maximum clipping).Amount, the amount of clipping from 0% (no clipping) to 100% (fully clipped)
• Cos
  • Cosine distortion effect.Frequency, Frequency of the cosine effect.Amount, Amount of cosine distortion
• Cross 1
  • Cross, Position for cross distortionAmount, Amount of cross distortion
• Cross 2
  • Negative Cross distortion position for the negative signalPositive Cross distortion position for the positive signal.Amount, Amount of cross distortion.
• Foldover
  • Fold-over distortion, this amplifies and then 'folds over' the sound.Frequency Frequency of the fold-over distortion.Amount, Amount of fold-over distortion
• Fuzz
  • Fuzz-box distortionFrequenter Frequency of the fuzz-distortion effectAmount, Amount of fuzz distortion
• Gapper
  • Gapper distortion,Frequency Frequency of the gapper distortion effectAmount, Amount of fuzz distortion
• Hard-limiter
  • Hard limiter, this limits output which is to above or below the set limit level and thenboosts the signal.Limit The clipping level for the signal. From 0% (no limiting) to 100% (maximum limiter).Amount, The amount of post-limiting boosting.
• Low-Fi
  • Low-Fi effect, this reduces the sample & bit rate & adds noise to the signal.Bits Bit level of the signal.Sample Rate Sample rate of the signal.Noise Amount of noise added to the signal.
• OverDrive
  • Over-drive effectDrive, Drive for the over-drive effectAmount Over-drive mixing amount.
• Octave 1
  • Octave effect, this shifts the sound up an octave, Negative Mixing for the negative signal. Positive Mixing for the positive signal.
• Octave 2
  • Octave effect type 2,Frequency Frequency of the octave effect.Amount, Amount of octave effect.
• Power
  • Power wave-shaping effect.Drive, drive for the power effectAmount, Power mixing amount.
• Rectify
  • Rectifies the signal, by multiplying the negative signalRectification Rectification of the negative signal, from -100% (no rectification), 0% (half rectification) to 100% (full rectification)  Amount, Rectification mixing amount.
• Ring Modulation
  • The ring modulates (multiplies) different signals together depending on the type.Type Sine, Saw, Sqr & Tri, multiplies the input with the set oscillator.Frequency Sets the oscillator frequency.Amount Sets the ring modulation amount.
• Saturate
  • Saturation effect.Saturation Saturation levelAmount Saturation mixing amount
• SoftLimit
  • Soft-limiter effectAmount Soft-limiter amount
• Squarify
  • Squares the signal (turns it to a square wave), and then lowpass filter it.Negative Amount the negative signal is turned to a square wavePositive Amount the positive signal is turned to a square waveFilter Amount this square wave is lowpass filtered.
• Transient
  • Distorts the transients, i.e. the beginnings of sounds.Range Transient rangeAmount Transient distortion amount.
• Tube Simulator
  • Tube distortion effect, by saturating, limiting, rectifying and bandpass filtering the input.Limit, Hard limiter threshold.Rect Amount of rectification, from -100% (no change), 0% (half) to 100% (full).Saturate Amount of saturation..Tone Frequency of the band pass filter.Emphasis Bandwidth of the band pass filter.
• Atan
  • Mathematically determined distortion effect based, which distorts the sound by waveshaping using an arc-tan function.
• Clipper 2
  • This effect provides another interpretation of a clipping distortion. Symmetry control is added for further sound shaping.
• FM
  • This effect uses the input to modulate the frequency of an oscillator generated by RP DISTORT.
• Waveshaper
  • The waveshaper effects waveshapes the low & high signal differently and then pass it through a low-pass filter.
• Two Band
  • The last seven distortion effects come in two-band varieties. These are Two Band Cos, Fuzz, Limiter, OverDrive, Power, Rectification and Saturation.
  • The two band varieties work in the same manner as their single-band version but are able to process two different parts of the input signal separately. RP DISTORT splits the input signal in a low and a high frequency band. The split frequency determines the cutover point. The low and high band are the then separately distorted, and then mixed back together, using the mix control.

• 4 Band Equalizer effect.
• On/Off function.
• Low 125 Hz volume | Mid 1 500 Hz volume | Mid 2 2 kHz volume | High 8 kHz volume.

Noise gate (inside the distortion section):

• Noise gate unit, the noise-gate is an audio effect that removes any sound (gates) that is below a threshold volume.
• On / Off function.
• Threshold / Attack / Hold / Release paramaters.

• RP-Distort has a low & high pass filter, in the order low-pass filter then high-pass filter.
• On/Off function.
• 12 / 24dB Selects between a 12dB and a 24dB filterLow Frequency of the low pass filter.
• Low Q Resonance of the low pass filter.
• High Frequency of the high pass filter.
• High Q Resonance of the high pass filter.

• audio compressor with on/off selector
• threshold, ratio, attack, release and volume paramters

• 4x free modulation routings with amount control.
• 4x LFO with, tempo based sync mode,  waveform, speed, human feel, symmetry control
• bypass button for all active modulations
• global amount control for all active modulations

System Requirements

• PC: 32 & 64 bits VST and AAX for Windows XP / Vista / Windows 7/ Windows 8/ Windows 10
• Mac: 32 & 64 bits AU, VST and AAX  for OSX 10.6 or higher
• Serial/license system
  2nd serial for 2nd computer/laptop is available after you have registering the product’s original serial/license.